Search
By part number only
Browse by Manufacturer
GE WASHER TEARDOWN TOP LOAD STYLE 1995 TO CURRENT
GE  ( Hotpoint, Moffat ,McClary ) new style  washerdisconnect power first In approx. 1995 GE stopped making the metal drum washer and came out with a new plastic drum washer and plastic outer tank. To access the washer there are a couple clips between the top of the washer and the front panel that holds the panel on.  There is one on each side at about where the pictures show.  The clips are mounted on the cabinet and push down into slots on the front panel. Press in on these clips with a putty knife ( you will be pushing inward on the clip) and pull the top of the panel away from the cabinet when the clips are released. The bottom of the panel sits on a couple clips on the bottom of the washer. Pull out on the panel and  lift off the clips at the bottom. You now have access to the operating components of this washer. To remove the top panel, remove the bleach from the top panel and remove the two 1/4" drive screws from the top front of the washer and lift up and forward on the top panel. You will have to unclip the wire harness ( male-female wire connector ) for the lid switch.

______________________

______________________