Range, Refrigeration and washer Fault Codes are very much used these days on the newer Electonic Controls.

This guide may be incomplete as manufactures use different parts on different models. This is a general guide to fault codes. We assume no responsibility for any action taken on your part as a result of using this guide. Consult your owners manual, as it may give the fault codes for your particular model. Contact a local servicer for repairs.

If you didn't find your model/ brand in these fault code chartsContact us! Maybe we can help find your code.

AMANA / CALORIC

AMANA range
Display -glass link ERC Condition Repair
door flashing #0,1,2,3 latch switch broken replace
lock flashing latch switch broken replace
F 0 loss of safety signal replace adapter board
F 1 watchdog circuit replace ERC
F 2 oven too hot check sensor-1100 ohms
F3 F4 open or shorted sensor replace sensor
F7 shorted touch panel replace glass panel
F9 motorized door check latch
FF lock error check switch and motor
ERC III / Relay board with separate board / push buttons
F0 shorted push pad replace

Amana Wall ovens ( E.G., AOES3030**, A0CS3040**, AOCD2770**, AOCS2740**,AOGD2750**) 
Door status displayed ( Door lock status not sensed ) Verify operation of latch switches.
FF status displayed ( Door lock circuitry malfunctions at clean temperatures ) Verify operation of latch switches.
F1 failed ERC replace
F2 oven too hot check sensor 1100 ohms
F3 F4 shorted or open sensor replace
F5,F6,F8 failed ERC replace
F7 shorted or sticking button check glass alignment
F9 door latch failure replace

Amana 24" Electric Wall Ovens ( E.G., AOES2430** )
F1 Control malfunction ( Check latch switch,light switch,or door motor. Verify operation of latch switches. If ok, replace control.
F3 Open or shorted sensor ( Check sensor resistance and wiring. )